Loader - 120E Back
- Compatible with 1023E and 1025R Tractors
- Curved boom design
- Quik-Change attachment carrier standard
- Parkable
The parking mounting system on the 120E Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the D120, the 120E parking stands are kept in the torque tube for easy accessibility. To park the loader, simply install parking stands, remove pivot pins from the mast, disconnect the hydraulic hoses, and back out the tractor.
Images are from the former D120 loader with straight boom
Easy removal and mounting
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
71.2 in.
375 kg
825 lb
Measured at 500 mm ahead of pivot
259 kg
570 lb
806 kg
1808 lb
Measured at 500 mm ahead of pivot
552 kg
1238 lb
707 kg
1559 lb
54 in.
57 in.
49 in.
117 lb
375 kg
825 lb
Measured at 500 mm ahead of pivot
259 kg
570 lb
429 kg
944 lb
Measured at 500 mm ahead of pivot
309 kg
680 lb
806 kg
1808 lb
Measured at 500 mm ahead of pivot
552 kg
1238 lb
593 kg
1330 lb
At 59-in. (1500-mm) lift height
711 kg
1568 lb
At ground-level line
707 kg
1559 lb
1809 mm
71.2 in.
At full height - bucket level
1653 mm
65.1 in.
At full height - bucket dumped
1371 mm
54 in.
8.6 ft
-4.0 in.
571 mm
22.5 in.
At ground level - bucket level
1176 mm
46.3 in.
-40.1 degree (angle)
Rollback angle, degrees
31.2 degree (angle)
Dump angle, ground
-114.0 degree (angle)
4.0 seconds
Loader lower, seconds
2.5 seconds
Bucket dump, seconds
5.7 (without regen)/2.2 (with regen) seconds
Bucket rollback, seconds
3.5 seconds