Skip Nav

Loader - 220R Back

Model Number :
220R
The 220R Loader built to handle tough stuff without missing a beat.
  • Compatible with 2032R and 2038R tractors
  • Quik-Park™ mounting system for easy on, easy off in minutes
  • Optional single-point hydraulic coupler connects hydraulics with pull of a lever
  • Quik-Change™ Bucket System for fast and easy attachment changeovers
  • Mechanical Self-Leveling (MSL) Loader option with 1,377 lb (626 kg) lift capacity
Request Information
Operate with ease and efficiency using the optional field-installed mechanical self-leveling (MSL) loader

Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence.  With the MSL loader, you will notice:

  • Loader implement will maintain position wherever the loader is lifted to
  • Increased lift capacities
  • Reduction of material lost during operation
  • Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement

 

This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.

Quik-Park™ loader mounting system
Quik-Park loader mounting system Quik-Park loader mounting system
Quik-Park loader mounting system Quik-Park loader mounting system

The 220R loader is designed to easily attach to and detach from the tractor without tools.

 

The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.

Quik-Change attachment carrier
Quik-Change attachment Quik-Change attachment
CUT carrier (Quik-Change) on 220R Loader and 1450-mm (57-in.) standard bucket CUT carrier (Quik-Change) on 220R Loader and 1450-mm (57-in.) standard bucket
#

The Quik-Change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground.

This CUT Carrier is base equipment on the 120E and 120R loaders.

To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier.

Then install the retaining pins and the carrier is ready to work.

This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin Pivot pin

The pivot pins are made with a unique offset head design to eliminate cross-pins and cotter pins to retain the pin. Instead, the pin is held in place with a nut, which is very simple to install as it eliminates any alignment issues. The offset head of the pin prevents rotation of the pin and reduces pin wear.

 

A lubrication groove in the cylinder pin provides a path for grease to ensure proper lubrication of the cylinder pin and long life.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Key Specs
Maximum lift height
2160 mm
85 in.
Lift capacity at full height
Measured at pivot
509 kg
1120 lb
Measured at 500 mm ahead of pivot
365 kg
803 lb
Boom breakout force
Measured at pivot
886 kgf
1949 lbf
Measured at 500 mm ahead of pivot
618 kgf
1360 lbf
Bucket rollback force capacity
At ground-level line
972 kgf
2138 lbf
Clearance at full height - bucket dumped
1667 mm
66 in.
Dump angle, degrees
36 degree (angle)
Rollback angle, degrees
34 degree (angle)
Tractor
Model
2032R, 2038R
Front tire
23x8.50-14 4PR R4
Rear tire
14-17.5 6PR R4
Wheelbase
1725 mm
68 in.
Pump capacity
20.2 L/min
5.3 gpm
Rated pressure
17.23 MPa
2499 psi
Loader
Base weight
330.9 kg
729 lb
Leveling configuration
Non-Self Leveling
Bucket used
1450 mm
57 in.
Bucket weight
88 kg
194 lb
Lift capacity at full height
Measured at pivot
509 kg
1120 lb
Measured at 500 mm ahead of pivot
365 kg
803 lb
Lift capacity at 59 in. (1500 mm)
Measured at pivot
589 kg
1296 lb
Measured at 500 mm ahead of pivot
445 kg
979 lb
Boom breakout force
Measured at pivot
886 kgf
1949 lbf
Measured at 500 mm ahead of pivot
618 kgf
1360 lbf
Bucket rollback force capacity
At maximum height
1044 kgf
2297 lbf
At 59-in. (1500-mm) lift height
1302 kgf
2864 lbf
At ground-level line
972 kgf
2138 lbf
Dimensions
Maximum lift height
2160 mm
85 in.
At full height - bucket level
1999 mm
79 in.
At full height - bucket dumped
1667 mm
66 in.
Overall length
3076 mm
121 in.
Digging depth
149 mm
6 in.
Reach
At maximum height
756 mm
30 in.
At ground level - bucket level
1351 mm
51 in.
Bucket angle
Dump angle, degrees
36 degree (angle)
Rollback angle, degrees
34 degree (angle)
Dump angle, ground
115 degree (angle)
Cycle times
Loader raise, seconds
3.19 seconds
Loader lower, seconds
1.94 seconds
Bucket dump, seconds
4.76 seconds
Bucket rollback, seconds
2.91 seconds
Additional information
a
a
D
D
X