Loader - 300R Back
- Compatible with 3R Series Tractors
- Quik-Park™ mounting system for efficient attachment and removal
- Easy maintenance for increased uptime
- 999 pounds (453 kg) lift capacity
Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. There is no more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
90 in.
617 kg
1360 lb
Measured at 500 mm ahead of pivot
453 kg
999 lb
1295 kg
2855 lb
Measured at 500 mm ahead of pivot
922 kg
2032 lb
1188 kg
2619 lb
69 in.
68 in.
207 lb
617 kg
1360 lb
Measured at 500 mm ahead of pivot
453 kg
999 lb
771 kg
1700 lb
Measured at 500 mm ahead of pivot
595 kg
1312 lb
1295 kg
2855 lb
Measured at 500 mm ahead of pivot
922 kg
2032 lb
1205 kg
2657 lb
At 59-in. (1500-mm) lift height
1518 kg
3347 lb
At ground-level line
1188 kg
2619 lb
2284 mm
90 in.
At full height - bucket level
2123 mm
83.5 in.
At full height - bucket dumped
1743 mm
69 in.
10.24 ft
2.9 in.
773 mm
30.4 in.
At ground level - bucket level
1381 mm
54.4 in.
43 degree (angle)
Rollback angle, degrees
25 degree (angle)
2.76 seconds
Loader lower, seconds
1.69 seconds
Bucket dump, seconds
2.91 seconds
Bucket rollback, seconds
1.72 seconds