Skip Nav

Loader - 320R Back

Model Number :
320R
The model 320R Loader was designed for the 3033R, 3039R, and 3046R Tractors.
  • Compatible with 3R Series Tractors
  • Quik-Park™ mounting system for efficient attachment and removal
  • Quik-Change attachment carrier makes it easier and faster to move from chore to chore
  • 1,122 pounds (509 kg) lift capacity



Request Information
Quik-Park™ loader mounting system
Quik-Park loader mounting system Quik-Park loader mounting system

Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

Quick-change attachment carrier
Quick-change attachment carrier Quick-change attachment carrier

Allows fast, easy removal and mounting of attachments without tools.

End-of-pin lubrication means easy maintenance
Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Key Specs
Maximum lift height (A)
2616 mm
103.3 in.
Lift capacity at full height
Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf
Boom breakout force
Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf
Bucket rollback force capacity
At ground-level line (ZZ)
1335.4 kgf
2944 lbf
Clearance at full height - bucket dumped (C)
2003 kgf
78.8 lbf
Dump angle, degrees (E)
49.3 degree (angle)
Rollback angle, degrees (G)
23.8 degree (angle)
Tractor
Model
4105
Front tire
10-16.5 6PR R4T1
Rear tire
17.52-24 8PR R4T1
Wheelbase
1727 mm
68 in.
Pump capacity
5.7 gpm
Rated pressure
2500 psi
Loader
Base weight
281.09 kg
Bucket used
Materials
Bucket weight
93.8 kg
207 lb
Lift capacity at full height
Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf
Lift capacity at 59 in. (1500 mm)
Measured at pivot (W)
959 kgf
2109 lbf
Measured at 500 mm ahead of pivot (X)
745 kgf
1639 lbf
Boom breakout force
Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf
Bucket rollback force capacity
At maximum height (VV)
822 kgf
1819 lbf
At 59-in. (1500-mm) lift height (XX)
1397 kgf
3079 lbf
At ground-level line (ZZ)
1335.4 kgf
2944 lbf
Dimensions
Maximum lift height (A)
2616 mm
103.3 in.
At full height - bucket level(B)
2411 mm
94.9 in.
At full height - bucket dumped (C)
2003 mm
78.8 in.
Overall length (I+F), ft (m)
3.218 m
10.55 ft
Digging depth (H)
121 mm
4.76 in.
Reach
At maximum height (D)
766 mm
30.1 in.
At ground level - bucket level (F)
1491 mm
50.7 in.
Bucket angle
Dump angle, degrees (E)
49.3 degree (angle)
Rollback angle, degrees (G)
23.8 degree (angle)
Dump angle, ground
138 degree (angle)
Cycle times
Loader raise, seconds
3.6 seconds
Loader lower, seconds
2.1 seconds
Bucket dump, seconds
3.0 / 1.2 (with regen) seconds
Bucket rollback, seconds
1.8 seconds
Additional information
a
a
D
D
X