JOHN DEERE - 2330 Back

JOHN DEERE 2330 MULCH FINISHER

HIGHLIGHTS
Working widths from 21 ft, 9 in. to 56 ft, 3 in. (6.6 to 17.2 m)
Excellent residue handling capabilities
Lattice-style frame design
TruSet Active improves tillage depth accuracy and makes adjustments for varying field conditions, such as tire sink in soft soils or residue build up on tires, with no need for operator input

FEATURES
WIDE RANGE OF WORKING WIDTHS AVAILABLE TO MATCH ACREAGE AND HORSEPOWER REQUIREMENTS
At 16-km/h (10-mph) working speeds, the 2330 Mulch Finisher can cover up to 27.5 ha (68 acres) per hour enabling producers to size their implements for their unique productivity and agronomic needs.

The 2330 is available in sizes ranging from 6.6 to 17.2 m (21 ft, 9 in. to 56 ft, 3 in.). Horsepower requirements range from 24.5 to 34.2 kW/m (10 to 14 hp-ft), depending on the soil, depth, and speed.

LEVEL-LIFT FRAME ENSURES EVEN OPERATION THROUGH ALL OPERATING DEPTHS
The Level-lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting.

The combination of the sweep and harrow functions promotes consistent and uniform chemical placement and mixing. The T-hitch enables easy turnbuckle adjustment for fast tractor changeover and quick implement leveling fore to aft.

The heavy-duty T-hitch allows for tighter turning, decreasing the number of headlands required for quick turns on the end. The T-hitch also houses the hoses and wiring harness, protecting them from crop and incidental tire contact.

LOW-CONCAVITY DISKS ARE SPACED FOR EFFECTIVE RESIDUE SLICING
The producer can work ground faster with the 508-MM X 5-MM (20-IN. X 0.197-IN.) low-concavity disk blades and outside blades tapered to 457 MM (18 IN.) on the 2330 Mulch Finisher:
Allows aggressive cutting action
Minimizes ridging

Blades are spaced 184-MM (7.25-IN.) apart and are fixed at an 8-degree gang angle:
Results in effective slicing in heavy residue
Moves the soil inward toward the center of the implement for a level seedbed

C-spring cushion gangs help protect against rocks and other obstructions in the field. dura-flex (3+1) bearings are standard equipment:
Triple lip on the inner race and a wide seal between the outer race and flange prevents soil from entering between the bearings and flanges, and helps retain lubrication in the bearings
Greaseable for long life

All disk gangs feature combination rigid/self-adjusting scrapers as standard equipment:
Prevent soil buildup on inside of disk blades
Adjustable to compensate for wear
Self-adjusting operationthe spring tension helps hold the scrapers against the disk blade in sticky soil conditions

Engaged disk gangs add to the stability of the implement at higher ground speeds for consistent working depth in uneven ground.
Allow for good weed kill and tilling
Provide excellent chemical incorporation

TRUE 229-MM (9-IN.) SPLIT-THE-MIDDLE SPACING PROVIDES COMPLETE FIELD COVERAGE
Thanks to an updated frame design that enables true 229-mm (9-in.) split-the-middle shank spacing, the 2330 Mulch Finishers can maintain consistent depth and evenly cover the field to achieve an optimal seedbed while flowing residue and managing weeds.

SEEDBED PREPARATION
Even at high speeds and in tough field conditions, the TruPosition C-shanks with 91 kg (200 lb) of trip force minimize side-to-side movement and provide the operator better control of the soil profile for improved leveling capabilities.

These shanks provide a full tillage cut across the entire width of the implement. The shanks stay firmly planted in tough soils without quickly relieving. As a result, the soil is mixed completely and streaks are reduced. This helps producers maximize their productivity and create flat seedbeds for smooth planter operation and consistent seed depth.

WEED MANAGEMENT
The even 229-mm (9-in.) split-the-middle shank spacing enables the 2330 Mulch Finisher to minimize the potential of remaining strips of weeds that survive the tillage pass. With a mulch finisher pass just prior to planting/seeding, the crop can emerge into a weed-free field that gives it the best chance to reach canopy ahead of the weeds.

If some weeds emerge and a post-emergence herbicide is needed, weeds should be smaller and easier to control. As a result, the mulch finisher pass helps keep weed management costs under control and helps preserve crop yield potential.

TRUPOSITION STANDARDS DELIVER 91 KG (200 LB) OF TRIP FORCE FOR CONSISTENT DEPTH AND EVEN CUT
Producers are working ground at faster speeds and in tighter soil conditions, requiring more from standards and frames.

THE 91-KG (200-LB) TRIP TRUPOSITION STANDARDS INCLUDE:
Heat-treated mounting bracket
Cast pivot assembly with front stop
19-mm x 45-mm x 610-mm (3/4 x 1-3/4 x 24-in.) C-shank, retained by a bolt through the casting and U-boltensures consistent sweep depth, level seedbeds in all secondary conditions, and thoroughly incorporated chemicals
610-mm (24-in.) underframe clearance provides extra room for excellent residue flow on 229-mm (9-in.) spacing
254-mm (10-in.) trip height (at shank) clears rocks and obstacles
Replaceable split-tension sleeve and chrome bushing extend life of standard and implement

These standards provide 91 kg (200 lb) of trip force and enable producers to maintain a consistent sweep depth. A combination of spring pressure and pivot casting geometry minimizes side-to-side movement and provides the ultimate in soil profile and seedbed.

VARIETY OF 254-MM (10-IN.) SWEEPS PROVIDE SOLUTIONS FOR ALL SOIL CONDITIONS
The John Deere high-productivity sweep options are recommended for the high-working-speed market and perform best at speeds of 11-16 km/h (7-10 mph). With a low profile and curved wing shape, the high-productivity sweeps provide low draft and consistent penetration while easily getting through tough and heavy residue. Compared to Tru-Width sweeps, high-productivity sweeps are designed to exert less draft and retain their shape for longer wear life so producers can stay productive in the field longer.

The high-productivity sweeps for the John Deere 2330 Mulch Finisher come in a 254-mm (10-in.) width, both in the bolt-on and the knock-on Perma-Loc version. They fit all 47-degree standards with 44-mm (1.75-in.) hole spacing and 11 mm (0.4375 in.) that currently take Tru-Width sweeps, both John Deere and other makes.

PROFINISH LEVELING SYSTEM OFFERS WIDE RANGE OF REAR HARROWS TO MEET AGRONOMIC NEEDS
Depending on agronomic needs, producers have a choice of six rear harrow options included in the ProFinish Leveling System on the 2330 Mulch Finisher.

TRUSET FEATURES, PACKAGES, AND DOCUMENTATION
With short windows of time to perform tillage operations, TruSet provides significant productivity improvements as operators can adjust the tool with just the push of a button, maximizing acres covered per day. By responding to conditions as they change throughout the field, TruSet Active enables operators to generate a higher-quality tillage performance within the first pass.

Using a GreenStar display, an operator sees real-time data for a variety of feature settings, ensuring confidence in desired tillage outcomes. Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions, which allows for even quicker implement adjustments.

Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the tool are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.

WING DOWN PRESSURE (PREMIUM PACKAGE)
TRUSET DOCUMENTATION
With integrated TruSet Tillage technology, operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature allows producers to capture and analyze the tillage pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.

Operators can document data for the depth of their tillage tool along with rolling basket down pressure. By creating an as-applied map based off global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.

Additionally, the TELUS Agronomy Prescription Creator company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the tillage tools. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that command the implement to the desired depth and pressure settings for optimum agronomic results.

REAR HITCH COMPATIBLE WITH ALL 2330 CONFIGURATIONS AND REAR HARROWS
A substantial rear hitch is available to give the 2330 the versatility to pull the 200 Seedbed Finisher or other rear attachments. The rear hitch includes:
Rectangular tube construction
Telescoping hitch
Serviceable drawbar
453-kg (1000-lb) tongue weight rating
13,000 gross vehicle weight (GVW) rating for five-section machines; 10,000 gross vehicle weight (GVW) rating for three-section machines
Wiring harness for transport lights
Hydraulic hoses and couplers

The rear hitch is fully compatible with all 2330 rear harrow configurations.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate