JOHN DEERE - 1745 Back

1745 COMPACT PLANTER

KEY FEATURES
Compact design ideal for small fields and narrow-road transport
4 configurations with row spacings at 15-in., 20-in., or 30-in.
Pivot-fold transport from cab in only 40 seconds
Compatible with older tractors with lower hydraulic flow

EASILY NAVIGATE ROADS WITH NARROW TRANSPORT POSITION

Navigate narrow roads, bridges, and field entrances with the narrow transport position of the 1745 Planter.
Planter follows the standard duals on a tractor
Typical transport width of 3.71 m (12 ft, 2 in.)*
Typical transport height of 3.84 m (12 ft, 7 in.)*
Main hydraulic cylinder mast can be lowered under 3.68 m (12 ft) for storage
Row-units fold toward the center of the road for stability
Comparable non-folding 1785 Planter has a typical transport width of 6.96 m (22 ft, 10 in.).

*NOTE: Transport dimensions may vary based on options. Product features are based on published information at the time of publication and are subject to change without notice.

SAVE TIME BY FOLDING THE PLANTER FROM THE CAB

Minimize non-productive planting time by folding the planter from the cab of the tractor.
Complete the unfold and fold cycles in less than one minute.
By utilizing a frame control box, the base planter requires one selective control valve (SCV). Folding, raise/lower, and markers can all be tied to one hydraulic circuit.

INCREASE VERSATILITY BY APPLYING LIQUID OR DRY FERTILIZER WITH A SPLIT-ROW PLANTER

If you are looking to split-apply your fertilizer, the 1745 Planter offers liquid or dry fertilizer options on all non-bulk fill models, including split-row configurations.
Liquid fertilizer with single-disk, frame-mounted offset openers or in-furrow placement is available with a storage capacity of 1,136 L (300 gal).
Dry fertilizer with single-disk, frame-mounted offset openers is available with a storage capacity of 1,200 L (42.4 cu ft).
Fertilizer application is on the front rank only, with 76.2-cm (30-in.) spacing.
The fertilizer system is driven by a tire contact drive.

MAXIMIZE PRODUCTIVITY WITH TWO PLANTER CONFIGURATIONS TO MATCH YOUR OPERATION

The 1745 Planter comes in two main row-unit configurations with the option of keeping it simple or adding more advanced features.
8-row, 76.2-cm (30-in.) configuration
15-row, 38.1-cm (15-in.) configuration allows for planting corn in 76.2-cm (30-in.) rows and soybeans in 38.1-cm (15-in.) rows
Select between mechanical or vacuum meters.
Dry or liquid fertilizer is available on all non-Central Commodity System (CCS) models.
Select more advanced options like the Pro-Shaft cable drive system, RowCommand row clutches, CCS, and the SeedStar XP monitoring system.

COMPATIBILITY WITH A WIDE RANGE OF TRACTORS

The simple design of the 1745 Planter makes it compatible with a wide range of tractors.
Non-vacuum machine requires one selective control valve (SCV) when markers are tied to lift.
Vacuum machine requires two SCVs when markers are tied to lift.
There is a minimum drawbar horsepower requirement of 86.5 kW (116 hp) on a 15-row machine.
There is a minimum drawbar horsepower requirement of 70.8 kW (95 hp) on an 8-row machine.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate