JOHN DEERE - G5 Back

JOHN DEERE DISPLAY G5 UNIVERSAL DISPLAY / G5 COMMANDCENTER

G5 UNIVERSAL DISPLAY
Large, 10.1-inch touchscreen 35% larger than previous models
3x faster processor than previous models, for quicker cold boot times
Brighter, clearer 1080p HD resolution
Permanent AutoTrac, Section Control, and AutoTrac, RowSense license available

FEATURES

GET STARTED EASIER WITH JOHN DEERE PRECISION AG AND THE G5 UNIVERSAL DISPLAY
The G5 display replaces the 4240 Universal display and uses a larger 10.1 in. (25.65 cm), 1080p HD, capacitive touchscreen and can grow into a fully capable, movable precision ag display. Tied with a StarFire Position receiver, the G5 Universal display provides the power needed to perform all of John Deeres precision ag features. The G5 display includes the following:
View your information with configurable run screens
Quickly access information with shortcuts
Straighten your rows with an optional AutoTrac License
Reduce overlap with optional Section Control License
Document data and send it to Operations Center for analysis with Data Sync
Help operators out from afar with Remote Display Access
Optional AutoTrac RowSense License when guidance accuracy is critical
Optional Advanced Licenses to make your day easier
1 Analog Digital Input to improve you view of machines, implements and fields
2 Digital Video Inputs (Ethernet) for future use
RS232 Serial Ports to document and use prescriptions on third-party controllers
ISO VT and ISO Doc Compatibility to view and document third-party controllers
Expanded John Deere tractor compatibility more (CCD)
Extended Monitor Capability puts more information available in one glance and more controls at your fingertips
The G5 Universal Display ships from the factory with precision ag features included with the display and machine purchase. so that you can easily take the first steps on your precision ag journey:
Documentation
Data Sync
Remote Display Access
G5 CommandCenter also has the option from the factory to add AutoTrac, Section Control, and AutoTrac Rowsense. These will stay permanent with the display.

TAKE ADVANTAGE OF THE G5 UNIVERSAL DISPLAY, DESIGNED FOR EFFICIENCY
The G5 Universal Display allows you to bring your operation to the next level of efficiency through the following features:
Enhanced data merging functionalities to increase on-board/off-board flexibility
Improved data capturing capabilities to more precisely map and operate section control
Precise application of multiple products simultaneously with individual coverage maps and application points
Setup and startup operations easily with improved display navigation
Take advantage of the following features offered by the G5 Universal Display:
Status Center - Gather important information such as global positioning system (GPS), signal strength, and notifications.
Machine Settings - View and edit maintenance and calibrations
System Tab - The System tab allows the user to view and edit:
Date and time
Diagnostics center
Display and sound
File Manager
Language and units
Software Manager
Users and access
Operators Manual - Stay up to date on the latest G5 features and enhancements with the G5 Operators Manual at the users fingertips. With each bundle update, the G5 display automatically receives the latest G5 Operators Manual which means less time locating a paper copy and ensuring the most up-to-date information is always available.
Language and Units - Easily switch between languages with the option to set the active and alternate language. Configure the shortcut bar to include the language toggle allows different individuals to easily switch the display between languages.
Users and Access - Users and access allow the owner or manager to lock out certain functions to prevent operators from accessing or changing settings. Lock-out functions are managed with a defined pin for the administrator.
The G5 Universal Display can be set to one of two profiles, administrator or operator. The administrator profile is always set to the full access group. This group allows unlimited access to all the features and can lock and unlock features in the operator profile.
Applications - The Applications tab allows the user to view and edit:
AutoTrac guidance system
Calculator
Equipment manager
Fields and boundaries
Help tool
ISOBUS tasks
ISOBUS VT
Layout Manager
Mapping
Original GreenStar Monitor
Remote access
Section Control
Settings Manager
StarFire receiver
Video
Work Monitor
Work setup
Work totals
Layout Manager - Easily create page views that meet user needs and that are also equipped with default run pages.
Work Monitor - The Work Monitor application displays performance information about the task being performed by the machine.
You are shown averages, totals, and productivity of the machine, such as area worked, average working speed, and fuel usage.
Work setup places the settings needed to properly setup features such as AutoTrac, Documentation, and Section Control in a single location. Settings include:
- Client, farm, and field
- Crop type
- Machine and implement dimensions
- Variety/hybrid and planting/seeding rates
- Variable rate prescriptions
- Product and application rates
- Application rates through the implement screens
Video Capability - The video application on G5 and Gen4 displays has been redesigned to improve user interface and prepare for future enhancements. Features include the ability to name and configure cameras for viewing and scanning.
Machines equipped with a G5 CommandCenter, G5 CommandCenter and G5 Universal are equipped with four analog video inputs. G5 Universal is equipped with one analog video input.
- You can set a variety of triggers. With each trigger, the image appears on the display.
Flags - Mark areas in the field that need special attention such as rocks, tile lines, or weed pressure.
Flags previously recorded on the G5 or GreenStar 3 2630 Display can be transferred between monitors.

REDUCE THE RISK OF DATA LOSS BY WIRELESSLY SENDING AND RECEIVING DATA
G5 applications with renewable license allow data to be transferred from the display to the John Deere Operations Center for job reporting and analysis using Wireless Data Transfer (WDT) or Data Sync.
With WDT, you can manually send data to the John Deere Operations Center for review.
Data Sync automatically sends your data to the Operations Center, avoiding the need for manually exporting the data.
Wirelessly sending data helps you save time and money while increasing productivity. Wirelessly transfer setup, prescription, and documentation files securely between office, mobile devices, eliminating the need for USB transfer. This increases your uptime and productivity, reduces the risk of data loss, and enables easy data sharing and more timely decision making.
Through the John Deere Operations Center, you are in control and can easily share files with a John Deere dealer and other trusted advisers.
NOTE: For users in areas of poor cellular coverage, data can be exported using a USB flash drive.

ENABLE USE OF THIRD-PARTY EQUIPMENT RS232 COMPATIBILITY
Documentation of implement-based field operations remains important regardless of controller brand. G5Plus CommandCenter and Universal Displays and Gen 4 4600 CommandCenter and 4640 Universal Displays can communicate with select third-party controllers and third-party global positioning systems (GPS). Collectively, the system supplies the operator with instantaneous data while viewing the display. This information can be viewed in the John Deere Operations Center software for further analysis and reporting.
Third-party RS232 GPS compatibility enables documentation and Section Control on the G5 and G5Plus CommandCenter or Universal Display, 4600 CommandCenter and 4640 Universal Display; AutoTrac automated steering functionality is not compatible with third-party RS232 GPS.
When using a Raven controller, the G5 and Gen 4 displays can run in conjunction with map-based prescriptions.
Collected data may include:
Farm name
Field name
Application/seeding rates
Variety/chemical name
Totals
Crop type
Machine
Implement
Operator name
Field boundaries
Weather conditions
Soil conditions
Compatible controllers:
Raven SCS 440 controller
Raven SCS 450 controller
Raven SCS 660M controller
Compatible sensors:
Yara N-Sensor
Trimble GreenSeeker system
Fritzmeier nitrogen sensors
Compatible GPS:
Third-party GPS receivers
Required components:
Compatible controller
Capable display:
- G5 or G5Plus CommandCenter or Universal Display
- Gen 4 4600 CommandCenter v2 Processor or 4640 Universal Display
StarFire 3000 Receiver, StarFire 6000 Receiver, StarFire 6000 Integrated Receiver, StarFire 7000 Receiver, StarFire 70000 Integrated Receiver, or third-party (GPS) receiver
John Deere Operations Center
Third-party controller kit
SCS 440, SCS 450, and SCS 660M are trademarks of Raven Industries, Inc. Trimble and GreenSeeker are trademarks of Trimble, Inc.

UPDATE PRECISION AGRICULTURE COMPONENT WITH OVER-THE-AIR CONTROLLER REPROGRAMMING
Over-the-air reprogramming allows for fast, simple, and convenient updates that offer improved performance and new features when producers need them, when they want them, and when they are ready for them.
You have the power to reprogram John Deere Precision Ag component connected to your vehicle, over the air, without the need for a USB stick or separate download program:
No more need for a USB stick
No more need for a Mac or PC laptop
No more need for GreenStar Live Update
No more need for the MyJohnDeere portal Software Manager
No more need to remember to bring all of this hardware, nor to remember how to use all of these different tools
*NOTE: Other Precision Ag Technology displays (such as the Original GreenStar Display, GreenStar 2 1800, GreenStar 2 2600, and GreenStar 3 2630) cannot be reprogrammed by G5 or Gen 4 displays. Modular Telematics Gateway and non-Precision Ag Technology components, such as the tractor radio, are not updateable by the G5 display.
Mac is a trademark of Apple Inc.

G5 COMMANDCENTER
Optional factory-installed on select 2024 and later models with CommandCenter controls
3x faster processor than previous models, for quicker cold boot times
Large, 10.1-inch touchscreen with 1080p HD resolution 35% larger than previous models
Base includes Data Sync, Documentation, Over-the-Air Updates, and Remote Display Access

FEATURES

GET STARTED EASIER WITH JOHN DEERE PRECISION AG AND THE G5 COMMANDCENTER
G5 CommandCenter
Replacing the 4200 CommandCenter, some John Deere machines feature a 10 in. (25.65 cm), 1080p HD, capacitive touchscreen. Tied with a StarFire Position receiver, the G5 CommandCenter provides the power needed to perform all of John Deeres precision ag features. The G5 CommandCenter display includes the following:
View your information with configurable run screens
Quickly access information with shortcuts
Straighten your rows with an optional AutoTrac License
Reduce overlap with optional Section Control License
Document data and send it to Operations Center for analysis with Data Sync
Help operators out from afar with Remote Display Access
Optional AutoTrac RowSense License when guidance accuracy is critical
Optional Advanced Licenses to make your day easier
- 4 Analog Digital Input to improve you view of machines, implements and fields
- 2 Digital Video Inputs (Ethernet) for future use
RS232 Serial Ports to document and use prescriptions on third-party controllers
ISO VT and ISO Doc Compatibility to view and document third-party controllers
The G5 CommandCenter ships from the factory with these three features included with the display and machine purchase so that you can easily take the first steps on your precision ag journey:
Documentation
Data Sync
Remote Display Access
G5 CommandCenter also has the option from the factory to add AutoTrac, Section Control, and AutoTrac RowSense. These will stay permanent with the display.
Combine the display with a StarFire Receiver, and you are ready to get started with automated guidance by creating maps showing work completed and, if you have JDLink, wirelessly sending your data to the John Deere Operations Center. If you dont need automated steering, you can deduct AutoTrac when ordering your machine. If you want to do even more, you can add a G5 CommandCenter Section Control Permanent License for precision control of crop inputs. G5 displays also give you the option to improve your accuracy with AutoTrac RowSense and automating machine functions with G5 Advanced Licenses on capable machines.
NOTE: You will need an AutoTrac Permanent License to use the Section Control functionality with a G5 CommandCenter display.

WHY G5 COMMANDCENTER IS THE RIGHT TOOL FOR THE JOB
Sometimes a job on the farm does not require intense Precision Ag management practices. When this is the case, the G5 CommandCenter is just the tool for the job. The G5 offers the ability to run core Precision Ag features like AutoTrac guidance, Documentation, Section Control, and Data Sync.
There are two levels of Permanent Licenses that can be ordered on the G5. The first is the CommandCenter AutoTrac Permanent License, enabling operators to consistently drive the same guidance path pass to pass. The second is the G5 Section Control Permanent License. This combines the ability to use AutoTrac on a machine with the value of Section Control, eliminating overlap on critical field operations.
Data Sync enables display to automatically send data to John Deere Operations Center. Producers can analyze the data from completed fields or view where field work is in process, making it easier for them to make operational decisions. Data is available to analyze through the John Deere Operations Center from any internet-connected device, allowing producers to make important production decisions and giving operations the ability to invoice work recently completed.

TAKE ADVANTAGE OF THE G5PLUS COMMANDCENTER DISPLAYS, DESIGNED FOR EFFICIENCY
The G5Plus CommandCenter was designed to provide a consistent user experience by providing full screen viewing of more run page modules, shortcut keys, and precision agriculture capabilities.
Expect easier setup, along with increased operator confidence thanks to a simple, customizable interface. The improved design of the G5Plus CommandCenter also aids in an optimal operating experience and maximizes uptime.
In order to increase your efficiency, take advantage of the following features offered by the G5Plus CommandCenter:
Layout Manager - Easily create page views that meet user needs and that are also equipped with default run pages.
Language and Units - Easily switch between languages with the option to set the active and alternate language. Configure the shortcut bar to include the language toggle allows different individuals to easily switch the display between languages.
Users and Access - Users and access allow the owner or manager to lock out certain functions to prevent operators from accessing or changing settings. Lock-out functions are managed with a defined pin for the administrator.
The G5 CommandCenter can be set to one of two profiles, administrator, or operator. The administrator profile is always set to the full access group. This group allows unlimited access to all the features and can lock and unlock features in the operator profile.
Machine Monitor - The Machine Monitor application provides you instantaneous readings about the status or condition of your machine.
This application shows parameters such as engine speed, coolant temperature, and ground speed.
Work Monitor - The Work Monitor application displays performance information about the task being performed by the machine.
You are shown averages, totals, and productivity of the machine, such as area worked, average working speed, and fuel usage.
Work set up places the settings needed to properly setup features such as AutoTrac guidance, Documentation, and Section Control in a single location. Settings include:
- Client, farm, and field
- Crop type
- Machine and implement dimensions
- Variety/hybrid and planting/seeding rates
- Variable rate prescriptions
- Product and application rates
- Application rates through the implement screens
Operators Manual - Stay up to date on the latest displays, features, and enhancements with the Displays Operators Manual at the users fingertips. With each bundle update, the display automatically receives the latest Displays Operators Manual which means less time locating a paper copy and ensuring the most up-to-date information is always available.
Video Capability - The video application on G5 displays has been redesigned to improve user interface and prepare for future enhancements. Features include the ability to name and configure cameras for viewing and scanning.
Machines equipped with a G5 CommandCenter, G5Plus CommandCenter, or G5Plus Universal are equipped with four analog video inputs. G5 Universal is equipped with one analog video input.
- You can set a variety of triggers. With each trigger, the image appears on the display.
Flags - Mark areas in the field that need special attention such as rocks, tile lines, or weed pressure.
Flags previously recorded on the G5, Gen 4, or GreenStar 3 2630 Display can be transferred between monitors.
Field Boundaries - Manually drive field boundaries with the G5 / Gen4 CommandCenter or import existing boundary information from the G5 / Gen 4 / GreenStar 3 2630 Display or John Deere Operations Center. G5 / Gen 4 documentation data can be used to create boundaries from coverage within the John Deere Operations Center.
Dual-Display Mode - G5 CommandCenter or G5Plus CommandCenter may be configured to run with the following John Deere displays connected at the cornerpost of a John Deere tractor:
GreenStar 2 1800 Display
GreenStar 2 2600 Display
GreenStar 3 2630 Display
4640 Universal Display
4240 Universal Display
NOTE: Vehicle applications are always located on the G5 CommandCenter.
Automatic Base Station Switching - Producers using John Deere RTK Radio 450 or 900 can link a base station to a desired client, farm, or field. This allows automatic switching to the associated base station when changing fields. The ability to import base station assignments into Operations Center and send back to machines will be available at a later date.

REDUCE THE RISK OF DATA LOSS BY WIRELESSLY SENDING AND RECEIVING DATA
G5 applications with renewable license allow data to be transferred from the display to the John Deere Operations Center for job reporting and analysis using Wireless Data Transfer (WDT) or Data Sync.
With WDT, you can manually send data to the John Deere Operations Center for review.
Data Sync automatically sends your data to the Operations Center, avoiding the need for manually exporting the data.
Wirelessly sending data helps you save time and money while increasing productivity. Wirelessly transfer setup, prescription, and documentation files securely between office, mobile devices, eliminating the need for USB transfer. This increases your uptime and productivity, reduces the risk of data loss, and enables easy data sharing and more timely decision making.
Through the John Deere Operations Center, you are in control and can easily share files with a John Deere dealer and other trusted advisers.
NOTE: For users in areas of poor cellular coverage, data can be exported using a USB flash drive.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate