JOHN DEERE - 60D Back

JOHN DEERE - 60D HIGH CAPACITY AUTOCONNECT MID-MOUNT MOWER DECK

Mowing a lawn should be easy and affordable. An AutoConnect Mid-Mount Mower Deck for your compact tractor fills the bill with drive over attachment that's quick and simple. Together they can make your job easier and more satisfying.

FEATURES: HIGH CAPACITY AUTOCONNECT MID-MOUNT MOWER DECKS
54 in. and 60 in. (137 cm and 152 cm) cutting widths
Easy drive-over mower deck installation and removal
Have peace of mind mowing in many conditions for the long term with a robust 7-gauge thick deck
Compatible with rear 3-point hitch attachments, backhoes, and loaders so you can keep these implements attached while mowing
Mid-power take-off (PTO) driven
Height-of-cut is easily adjusted turning a knob located on the tractor

INSTALLATION AND REMOVAL
To install the 54D and 60D High-Capacity AutoConnect Mower Decks, the following steps are required.
1) Set the mower height of cut (HOC) to the install position.
2) Raise handles on the gauge wheels to release the lock.
3) Make sure the deck is on a firm, level surface.
4) Lower the mower lift arm using the rockshaft level control.
5) Slowly drive forward onto the mower deck while using the guide bar to maintain alignment.
6) Continue to drive forward until the latches in rear of deck snap into place.

With autoconnect power take-off (PTO) connection:
7) Raise the mower deck and change the HOC setting from install position to desired height of cut.
8) Use quick-release pins to lock the gauge wheels at desired mowing height.

With manual PTO connection:
7) Turn off tractor and step down off the tractor.
8) Reach underneath tractor and manually connect the PTO shaft.
9) Raise the mower deck and change the HOC setting from install position to desired height of cut.
10) Use quick-release pins to lock the gauge wheels at desired mowing height.

REMOVAL
REAR LOCK MECHANISM
NOTE: Four-wheel drive and low gear required to install/remove deck. Please refer to the operator's manual before installation and removal for complete instructions and safety information.

MID-MOWER LIFT SYSTEM FOR 1 FAMILY TRACTORS
MID-MOWER LIFT SYSTEM
The forward lift link is installed on the deck. It is spring loaded, allowing the link to connect automatically to front hangers (installed on tractor). The PTO drive-shaft design allows the shaft to automatically adjust as the female end of the PTO coupler engages with the male end of the gearbox coupler. The male end coupler has tapered guides to ensure engagement of both ends. Mower decks are equipped with a heavy-duty, double-sided locking latch to ensure rigidity and reliability.

MID-MOWER LIFT SYSTEM OPTIONS
STANDARD MECHANICAL MOWER LIFT
The standard mechanical mower lift system moves the mower in conjunction with the rear implement and is controlled using the rockshaft lever.

OPTIONAL HYDRAULIC MOWER LIFT
The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the dual selective control valve (SCV) (loader joystick) to lift the mower deck.

OPTIONAL INDEPENDENT HYDRAULIC MOWER LIFT
The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using the third-function button on the loader SCV joystick and gives the operator full control of the mower deck in up and down directions. This feature allows for quick height changes on the go.

NOTE: This option requires third-function SCV to be installed on the tractor.

MID-MOWER LIFT SYSTEM FOR 2025R TRACTOR
MID-MOWER LIFT SYSTEM
The forward lift link is installed on the deck. It is spring loaded, allowing the link to connect automatically to front hangers (installed on tractor). The PTO drive shaft design allows the shaft to automatically adjust as the female end of the PTO coupler engages with the male end of the gearbox coupler. The male end coupler has tapered guides to ensure engagement of both ends.

MID-MOWER LIFT SYSTEM OPTIONS
STANDARD MECHANICAL MOWER LIFT
The standard mechanical mower lift system moves the mower in conjunction with the rear implement and is controlled using the rockshaft lever.

OPTIONAL HYDRAULIC MOWER LIFT
The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the dual selective control valve (SCV) (loader joystick) to lift the mower deck.

OPTIONAL INDEPENDENT HYDRAULIC MOWER LIFT
The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using the third-function button on the loader SCV joystick and gives the operator full control of the mower deck in up and down directions. This feature allows for quick height changes on the go.

NOTE: This option requires third function SCV to be installed on the tractor.

COMPATIBLE WITH FRONT/REAR IMPLEMENTS
54D and 60D High-Capacity AutoConnect deck is compatible with rear 3-point hitch attachments, backhoes, and loaders. The operator can keep these extra implements attached while mowing. 1 Series and 2025R tractors are equipped with a dual mid-SCV as standard equipment. The mid-mower hydraulic lift can use the dual SCV (loader joystick), or third SCV (optional), to lift the mower deck, giving maximum flexibility.

MID-POWER TAKE-OFF (PTO) DRIVEN
Mowers are driven by the tractor's mid PTO, providing the following advantages:
Rear PTO remains free to operate rear-mounted implements
Shaft drive - no belts used to drive the mower
Faster and easier deck installation than other drive mechanisms

NOTE: To use the mid PTO for other front-mounted attachments, the operator needs to remove the quick-connect drive shaft and rear lift link. Several pins must be removed to allow removing the rear mower mounting linkage from the tractor. No tools are needed.

MOWER HEIGHT ADJUSTMENT
The height-of-cut (HOC) adjustment is located on the tractor and can easily be adjusted with the turn of the knob. To install/remove mower deck, the HOC adjustment knob must be set in the install position.

SERVICE AND DURABILITY
These mowers are designed with many serviceability and durability features. Some of these features are:
Drive over ramps can be easily removed via bolts for belt service
Blade spindles and mower drive shaft are greaseable to increase bearing life
Front lip and trim side of deck are reinforced for added strength
Plastic chute guard

AUTOCONNECT MID-MOUNT MOWER DECK
FEATURES: AUTOCONNECT MID-MOUNT MOWER DECKS
60.9 in. and 72.8 in. (155 cm and 185 cm) cutting widths
Easy drive-over mower deck installation
Have peace of mind mowing in many conditions for the long term with a robust 7-gauge thick deck
Compatible with rear 3-point hitch attachments, backhoes, and loaders so you can keep these implements attached while mowing
For the 2032R and 2038R, easily adjust your mowing height with the CommandCut controls. See your height setting on the controls display.
Simple, one pin, height-of-cut adjustment for 3R tractors
Mid-power take-off (PTO) driven

INSTALLATION AND REMOVAL
To install the AutoConnect Mower Deck, the following steps are required.
Make sure the deck is on a firm level surface and gauge wheels are in the unlocked position.
Align inside of left front tire with the vertical wall on the drive over ramp on the mower.
Slowly drive tractor straight over the deck making sure forward link aligns with brackets on the tractor.
Go forward until mower begins to pull along and clicks twice.
Lift mower deck.
Use quick-release pins to lock gauge wheels in place.
On 3R Series tractors, set height-of-cut (HOC) bracket to desired cutting position.

For 2R Series Tractors, use the CommandCut controls to set the HOC and lower the mower deck to the desired position.

MID-MOWER LIFT SYSTEM (3120 - 3720 AND 3R TRACTORS)
The hydraulic independent lift system-of-cut system allows the mower to be raised and lowered independently of the rear implements. It can use either the dual selective control valve (SCV) (loader joystick) or third SCV (optional) to lift mower deck. The forward lift link is installed on the deck. It is spring loaded, allowing the link to connect automatically to front hangers (installed on tractor). The PTO-drive shaft design allows the shaft to automatically adjust as the female end of the PTO coupler engage with the male end of the gearbox coupler. The male end coupler has tapered guides to ensure engagement of both ends.

MID-POWER TAKE-OFF (PTO) DRIVEN
Mowers are driven by the tractor's mid PTO, providing the following advantages:
Rear PTO remains free to operate rear-mounted implements
Shaft driveno belts used to drive the mower
Faster and easier deck installation than other drive mechanisms

Service and durability
These mowers are designed with many serviceability and durability features. Some of these features are:
Drive-over ramps can be easily removed via bolts for belt service.
Blade spindles are greaseable to increase bearing life
Front lip and trim side of deck are reinforced for added strength
Plastic chute guards on the 154.4-cm (60-in.) 7-Iron Mowers, and 182.9-cm (72-in.) 7-Iron Mower Decks

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate