JOHN DEERE - Z950M Back

JOHN DEERE Z950M Z900 SERIES COMMERCIAL ZTRAK ZERO-TURN MOWERS

M SERIES ZERO TURN MOWERS
These are the mowers that hit the sweet spot of performance and durability. Mulch On Demand option lets you switch instantly from mulching to side-discharging. Expanded height-of-cut range is easy to adjust. And Electronic Fuel Injection models are available, giving you the right amount of fuel at the right time.

HIGHLIGHTS
7-Iron PRO deck
Gasoline Engine
Propane Option Available
Rear Discharge Deck

POWERFUL 27-HP (20.1-KW) COMMERCIAL-GRADE ENGINE DELIVERS CLASS-LEADING PERFORMANCE AND EFFICIENCY
The Z950M is powered by an air-cooled, vertical shaft 27-hp (20.1-kW) gas engine

ENGINE FEATURES INCLUDE
Vertical shaft
Easy-access, dual-element air filter with quick release latch
30-amp alternator
Fuel pump
Complies with strict Environmental Protection Agency (EPA) and California Air Resources Board (CARB) emission standards without loss of horsepower or torque

OVERHEAD VALVE DESIGN
More horsepower and torque per cubic inch of displacement
Better fuel efficiency

FULL-PRESSURE LUBRICATION WITH FULL-FLOW FILTER
Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
Oil filter helps keep oil clean for increased engine life
V-twin big block design

ALUMINUM BLOCK ENGINES
Effectively dissipate heat
Lightweight and strong construction
Extend engine life due to elimination of debilitating engine temperatures
Air-cooled engine design

ENGINE SERVICE
The engine is easy to service, including changing the oil:
The engine oil check/fill tube is located at the top of the engine and easy to see and reach.
A flexible oil drain tube is included to conveniently drain oil into a pan, thus eliminating oil spills.

AIR CLEANER FILTERS OUT DUST THAT CAN DAMAGE AN ENGINE
ZTrak Z900 Mowers are equipped with a dual-element, canister-style air filter, easily accessible from the rear of the machine without tools.
The filtration system pulls clean air from above the engine, in turn filtering out the dust that can damage an engine over time.
Filters are extremely easy to change when required.
Pre-cleaner provides more protection against contamination in dusty and dirty applications.

MOW ALL DAY ON A SINGLE TANK OF FUEL WITH EFFICIENT AND EASY-TO-FILL FUEL TANK
The ZTrak Z900 Mowers are equipped with one single-fill, top-draw fuel tank:
11.5-U.S. gal. (43.5-L) capacity enables operators to mow all day without refueling.
The fuel gauge makes it quick and easy to see how much fuel is in the tank.
Top draw provides added safety.
A large fuel-filler neck is angled to make it easy for an operator to complete the fueling process.

KEY FEATURES OF THE 7-IRON PRO MOWER DECK:
Deck is forged from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside with fewer sharp corners for reduced material buildup.
Significantly fewer welds on the deck shell to wear or break - it is forged from a single sheet of steel rather than multiple fabrications. An anti-skid step on the deck provides easy machine mounting.
Extra reliability and long life with cast-iron blade spindle housings.
Higher blade tip speed than many competitors - approximately 18,500 fpm (5,639 m/min) for more blade cuts per inch mowed.
A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
Quick-release belt covers do not require tools or the removal of a ring clip; just lift one corner of the cover and rotate it slightly to remove.
A hole in the deck tab is provided for use of an optional ring clip for extra security, if desired.
This makes it quick and easy for you to clean out trash that may collect around the spindle sheave.
Deck has rectangular leading deck edge reinforcement and the rounded corners of the forged deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
Dual-captured front and rear anti-scalp wheels provide deck flotation over even the toughest terrain.
Three 1-in. (2.5-cm), cold-forged spindles are heat-treated for strength without bulk and are supported by ball bearings, providing reliability and performance; spindle housings are ribbed cast iron providing both excellent strength and heat dissipation.
The trim edge of the deck is equipped with a bumper that provides great abrasion resistance to protect the machine and the property.
The front edge is raised above the blade plane to allow even cutting of tall grass and is reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
Three spindle grease fittings are accessible from the top.
Blade overlap is 1.6 in. (40.6 mm), nearly 0.79 in. (20 mm) greater than previous decks, to reduce striping between blades.
Quick-change, cutting-height adjustment.

THE ZEVOLUTION WAY
What started as an idea over 25 years ago is now a way of life for landscape professionals like you. Zevolution is the continuous demand for quality in zero-turn mowers. Yours. And ours. You inspire us to keep improving on power and precision at every turn, on comfort and convenience. With every new Zevolution, comes the ultimate John Deere ZTrak mower.

From our hard-charging Z900 Series to the newest addition to our commercial lineup, the Z700 Series, youll find the right equipment for any job, especially the toughest jobs. Power up your crew with the engines, mower decks, features, tools, and attachments to run all day and finish with pride.

And remember, with every mower you add to the fleet, your local John Deere dealer stands ready with a full suite of NEVERSTOP Services and Support from equipment and financing to parts and service to exclusive product partnerships and special customer rewards.

You have a job to do. Ours is to help keep you evolving, keep growing, and most importantly, keep mowing.

ZTRAK M SERIES EFFICIENCY? VALUE? THIS IS WHERE THE RUBBER MEETS THE ROAD.
The Z920M, Z930M, Z950M, and Z960M hit the sweet spot where value-driven performance and day-in, day-out driving durability come together. They deliver all the power you need, the effortless Mulch On Demand you want and build quality that ensures years of reliable operation at every turn.

THE DECKS YOU NEED, FOR THE WAY YOU MOW.
7IRON PRO SIDE DISCHARGE Not everyone mows the same. We understand that. Thats why we have you covered with three great decks. First, theres the legendary 7Iron PRO side-discharge deck. Forged from a single sheet of seven-gauge steel using four million pounds of pressure, the 7Iron deck is 5.5 inches (13.9 cm) deep. Which explains why theyve remained an industry standard for over twenty years.

MULCH ON DEMAND
And when it comes to a mulching deck, nothing can touch our Mulch On Demand deck. Because we put the power to choose mulching or side-discharge at your fingertips. By shifting the lever to mulch position, the movable gate closes off the discharge chute.

FASTBACK PRO REAR DISCHARGE
Lastly, if you need to mow right to the edge, theres the FastBack PRO Rear Discharge deck. A unique baffling system reduces clumping and windrowing often associated with rear-discharge decks. So less clippings get on the operator and stay where they should: in the turf

THREE SEAT CHOICES WITH COMFORTGLIDE FORE/AFT SUSPENSION OFFER EXCEPTIONAL OPERATOR COMFORT
There are three seating options available for the M Series, all of which are factory installed:
1. Deluxe comfort seat with armrests
2. Deluxe comfort seat with armrests and isolation
3. Fully adjustable suspension seat with armrests

COMFORTGLIDE FORE/AFT SUSPENSION CONTROL LEVER
Each seat has the ComfortGlide fore/aft suspension system that gives superior ride comfort over uneven areas:
Seat can travel up to 2 in. (50.8 mm) fore and aft to absorb bumps for a significant enhancement to ride comfort.
Control lever provides the ability to easily lock out fore/aft suspension movement if desired.
One lever has three functions:
o Slide seat forward and back 3 in. (10.2 cm) to allow the operator the ability to choose the leg room needed
o Activate ComfortGlide fore/aft seat suspension
o Lock out ComfortGlide fore/aft seat suspension

DELUXE COMFORT SEAT WITH ARMRESTS
The deluxe comfort seat with armrests is standard on all M Series models:
Rubber springs are provided to increase ride comfort.
A convenient seat latch makes it easy to lift the seat.
The seat is factory installed.

DELUXE COMFORT SEAT WITH ARMRESTS AND ISOLATION
The deluxe comfort seat with armrests and isolation is available on the M and R Series:
Rubber springs are provided to isolate the seat base and to increase ride comfort.
A convenient seat latch makes it easy to lift the seat.
Isolation mounting is a good feature to reduce vibration for operators who do not require the fully adjustable suspension seat option.
Factory installed on Z900s ordered with the deluxe comfort seat with armrests and isolation option.

FULLY ADJUSTABLE SUSPENSION SEAT WITH ARMRESTS
A fully adjustable suspension seat with armrests option is available on the M and R Series:
Adjustable back angle is provided for individual operator comfort.
Adjustable lumbar support helps to suit the needs of the operator.
A suspension seat control dial gives easy adjustment for operator weight and ride comfort.
A convenient seat latch provides ease of lifting the seat.
On Z900s ordered with the fully adjustable suspension seat with armrests option, it is factory installed.

DESIGNED FOR OPERATOR COMFORT
Two-lever hydrostatic control provides the following:
The operator can select the ground speed and direction control simply by moving levers forward or reverse.
Positive neutral lock position for levers provides added safety.
Brake & Go operator-presence system returns levers to the neutral position when the brake pedal is actively engaged.
Starting the machines is as easy as starting a car. It no longer matters if the control levers are extended out or pulled in, as long as the parking brake is engaged. Just turn the key and go.
Wide-bend, large-diameter steering levers swing out easily for entry and exit from the operator platform.

ATTACHMENTS
Some jobs are more demanding than others. No worries: our Z900 mowers can handle the extra work. Whether its collecting clippings, carrying extra tools, or just picking up trash, a ZTrak comes through like a pro.

THREE-BAG MATERIAL COLLECTION SYSTEM (MCS)
Fill three large bags to capacity with from this powerful, heavy-duty steel-fan blower. One-pass cleanup with minimal chance of clogging is accomplished with the powerful, power take-off (PTO) driven blower and large-diameter hoses.

DUMP FROM SEAT (DFS) MATERIAL COLLECTION SYSTEM (MCS)
You can fill this large hopper to capacity with finely chopped and compacted material from the powerful, heavy-duty steel-fan blower. Efficient cleanup with minimal chance of clogging.

TOOL AND TRAY MOUNTS
The string trimmer mount includes two brackets that will hold a string trimmer securely in place on your mower. A cargo tray provides a convenient place to carry small hand tools, gloves, etc. The yard tool kit includes a bracket that will hold up to two long-handled yard tools, such as a shovel or rake.

SHADEPRO CANOPY
Experience over-the-top comfort! The ShadePro Canopys overhead sun protection and cooling fan make mowing a breeze.

SUN CANOPY
Keep the sun at bay all day with this heavy-duty canopy. Secures easily to the top of the rollover protective structure.

TRASH RECEPTACLE KIT
This kit provides a mounting bracket, a 5-gal. bucket, and a trash-grabbing apparatus. It enables trash pickup and storage without having to leave the mower seat.

Note: Attachments may reduce Slope Operating Limit. See Operators Manual.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate