JOHN DEERE - 375PRO Back

JOHN DEERE - 375PRO - ROTARY HARVESTING HEAD

PRO INSPIRED FOR PRO PERFORMANCE
Whether you're after downed crop or working in moist conditions, there's a John Deere rotary head built just for you. Designed with fewer lube points for fast maintenance, our small and large drum heads are built to deliver high-speed cutting efficiency in any condition.

FEATURES
Small drum cutting
Small drum gathering
Advanced header-height control
Row scrapers and cleaners prevent crop building

FAST-TURNING SAW BLADES CUT ALL KINDS OF CROP
The saw blades of John Deere rotary crop headers cut quickly and thoroughly at a high speed of rotation. As the fast-turning blades cut the full width, crops can be harvested regardless of the row spacing. Thanks to this row-independent harvesting technology, the field can be worked from any side, which is particularly important for down crop.

The fast-turning saw blades allow crops with a lot of weeds to be harvested easily. Besides maize, a wide range of crops such as sorghum, whole crop silage, oilseed, canola, pampas grass, and miscanthus can be harvested.

KEY FEATURES
Fast turning saw blades can cut in difficult harvesting conditions to give the operator increased uptime.
Headers can be used in various stemmed crops and there is no need for extra headers, which saves on the cost of operation.

INTAKE FINGERS AND GATHERER DRUMS FOR SECURE CROP GUIDANCE
After the fast-rotating blades cut the crop, the intake fingers push the plants into the gatherer drums that rotate in the same direction at low speeds. Every plant is pushed into the teeth of the gathering drum. The specially designed shape of the teeth ensures that both small and large plants are conveyed in a secure way.

The new and improved intake finger design allows for the crop conveyance to start deeper into the drum to ensure plants are more securely held prior to cutting, which in turns allows for a clean cut before being guided into the machine while maintaining control of the stalk. Improving the intake area on the 400pro series headers allows for less cob and crop losses during difficult harvesting conditions. The new intake drums with the new tooth design allows for better performance in down crops.

In the machine, the plants are taken off the back of the gatherer drum by scrapers. Depending on the width of the header, they are forwarded to the cross-feed drums or immediately fed into the angled feed drums in the middle of the machine.

To provide an increase in uptime and productivity the 400pro headers also feature a new-style gathering drum. This particular gathering drum allows for the top cover to be removed separately and quickly provide better access to the intake fingers for increased serviceability and easier access for cleaning.

LENGTHWISE FEEDING FOR OPTIMAL CHOPPING QUALITY
Even feeding of the harvested crop bundled lengthwise to the chopper unit of the self-propelled forage harvester (SPFH) is crucial for an even cut. Only even, lengthwise feeding allows for the full use of the power installed on the SPFH.

BENEFITS
Bundling of lengthwise stalks is the basis for perfect cutting.

Two angled feed drums push the crop toward the feed rolls of the SPFH. The size of the feed drums depends on the size of the header; the six-row headers feature three rings that push the crop in the feed rolls of the SPFH. The eight-, 10-, and 12-row headers feature a lower version with only two rings.

BENEFITS:
The feeding drum size, depending on the working width, provides the necessary space to use 10- and 12-row headers, which allows for the operator to feed larger crop bundles to the SPFH.

OPEN DESIGN KEEPS THE HEADER GOING
With the most recent generation of the small drum headers, leading performance is proven. Due to feed availability pressures, the variety of plants and harvesting conditions becomes more and more challenging. The investment into a special head is expensive. The John Deere small-drum header is a good alternative to harvest a variety of crops.

The most challenging is the optimization of the crop flow in the header. An open construction was the solution. All drum scrapers or holders of divider points are positioned out of the crop flow. An accumulation or blocking of weeds and leaves will be avoided.

BENEFITS:
The open design ensures the header is self-cleaning for cleaner silage.
The open design is more reliable because dirt does not build up in the header.

ADVANCED HEADER CONTROL (AHC) SENSORS
The AHC sensors are located at the two outermost points from the header. The sensors continuously scan the ground and adjust the height and inclination of the attachment. This quick adjustment guarantees a constant stubble height. The AHC sensors are optional equipment for eight- and 10-row machines. The AHC sensors are base equipment for 12-row machines.

THIRD HEADER HEIGHT SENSOR
For eight- and 10-row machines, the third sensor is optional equipment. The third sensor is only available in combination with the RowSense system as it is installed in the central RowSense pointer. The two-sensor Advanced Header Control (AHC) does a good job in most conditions. The optional third sensor is needed in extremely uneven terrain or on wide headers.

IMPROVED GROUND FOLLOWING WITH THIRD ADVANCED HEADER CONTROL (AHC) SENSOR
Experience improved ground following with the third AHC sensor, available as a bundle for the middle of the machine.
Better following of ground contours
Prevents wide headers from diving into plough furrows, for example
Less wear

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate