JOHN DEERE - 995 Back

995 REVERSIBLE PLOW

HIGHLIGHTS
Moldboard frame pivots with the bottoms
Plastic moldboard and steel shins
Landsides with wedges
Front gauge wheels

FEATURES
V-STYLE MAINFRAME DISTRIBUTES WEIGHT FOR GOOD PENETRATION
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration. The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

MOLDBOARD FRAME PIVOTS WITH THE BOTTOMS
All 995 Moldboard Plows use only one set of bottoms. The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
Requires less 3-point hitch capacity
Requires less ballasting of the tractor front end
Eliminates initial cost and service requirements for one complete set of standards and bottoms

INTEGRAL ON-LAND HITCH PROVIDES EXCELLENT MANEUVERABILITY
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
Category 3/3N Quik-Coupler compatible
Tractor rockshaft lever controls the raising and lowering of the plow [Maximum plowing depth to 356 mm (14 in.)]
Provides ample clearance between the tractor tires and the plow

ADJUST FRONT GAUGE WHEELS TO LIMIT PLOWING DEPTH
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

REAR GAUGE WHEELS COME IN STANDARD EQUIPMENT
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
Equipped with 6.70-15 tires for good flotation
Easy turnbuckle adjustment on rear gauge wheel
Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate