DEERE - 304 G-TIER Back

DEERE 304 G-TIERCOMPACT WHEEL LOADERS

SAY HELLO TO NEW POSSIBILITIES
The John Deere G-Tier Compact Wheel Loader lineup delivers rugged, reliable, and economical solutions that dont sacrifice equipment quality or dealer support. Simple and intuitive machine functionality is a perfect fit for novice operators, while performance-enhancing options expand capabilities to boost the performance of experienced pros. Whether you work in site development, landscaping, or ag material handling, the sizable travel-speed increase powering the 304 G-tier is just one of the many customer-inspired ideas designed to move your operation to a new level of productivity.

FEATURES
COMFORT IN THE CAB
New cab design features frameless doors and an expansive ceiling-to-floor windshield with a clear view to the front tires. Adjustable display mounted on the A-post rail provides a wealth of operating info. Optimized airflow through the HVAC system enhances operator comfort.

HAVE SPEED, WILL TRAVEL
Impressive 18.6-mph ground speed helps you move quickly around the jobsite and on to the next task.

IN COMMAND
Increased machine height and width compared to the 304L improve jobsite visibility and overall stability.

ITS ALL ABOUT CONTROL
Easily control hydraulic attachments like brooms and snow blowers with the optional attachment-assist package.* System includes third function mini-joystick and combined creep control and throttle lock that allows the operator to lock in engine speed to maintain consistent hydraulic flow as needed.

*Available for cab-equipped models only.

POWER UP
Smooth-running turbocharged Yanmar engine packs plenty of power and torque reserve. Limited-slip differential lock automatically delivers power to the tire with the best traction, for extra bucket-filling effort.

KEEP THINGS SIMPLE
Ground-level fuel fill and extended service intervals help simplify routine maintenance.

CLOSE AT HAND
Boom, bucket, F-N-R, and third-function hydraulics are positioned on the same ergonomic low-effort lever, for convenient one-hand control. Handy switches put control of the coupler, travel speed, park brake, lights, and other functions within easy reach.

RIDE IT OUT
Operator-defined settings allow optional speed-activated ride control to automatically switch off and on when established speed thresholds are reached.

THE CHOICE IS YOURS
ROPS-certified open-canopy model is designed to withstand the elements with weather-resistant gauges, an extended rooftop, nonskid floor mats, and optional vandal proofing. For year-round comfort, opt for a heated and air-conditioned low-profile cab.

GO WITH THE FLOW
Cooling package has been redesigned with larger entry/ exit screens to optimize flow and performance.

LARGE FUEL TANK LETS YOU RUN LONGER BETWEEN FILL-UPS OVER L-SERIES MACHINES
KEEP WORKING LONGER
Large fuel tank let you run longer between fill-ups. Durable plastic construction helps prevent damage and rust, extending wear life.

BUSINESS BOOSTER
John Deere attachments are a great way to expand the flexibility of your operation. With more than 100 models, theyll help you broaden your abilities, work smarter, and accomplish even more.

HERE TO BACK YOU UP
Parts and service are available at over 1,400 John Deere dealer locations throughout North America.

ADDITIONAL EQUIPMENT
ENGINE
Antifreeze, 37 deg. C (34 deg. F)
Coolant recovery tank
Fan safety guard
Fan, sucker type, direct drive
Under-hood aftertreatment (including diesel oxidation catalyst and diesel particulate filter)
Environmentally friendly engine oil drain
Engine oil cooler
Quick-release fuel filter and water separator
Automatic engine glow plugs for cold start
Engine coolant heater, 1,000 watts, 110 volts (Optional or special)

ELECTRICAL
Starter switch with electric fuel cutoff
12-volt system
Electrical load center: Blade-type fuses
Standard battery (1), 12 volt with 830 CCA
Master electrical disconnect switch
Alternator, 12 volts, 80 amps
Horn (conforms to SAE J994 / J1446)
Lights (conform to SAE 99): Driving / Turn signals / Flashers / Stop / Taillights
Worklights, front (2)
Worklights, rear (2)
Reverse warning alarm (conforms to SAE J994 / J1446)
Multifunction monitor with audible and visual warnings: Engine coolant temperature and hydraulic oil temperature / Gauge: Fuel / Visual indicators: Air-filter restriction, low voltage, coolant temperature, engine oil pressure, engine preheat, engine rpm, hydraulic bucket return-to-dig control, hydraulic oil temperature, lights high beam, park brake, turn signals, fuel-level gauge, and hour meter
Indicator lights: Engine air filter / Battery voltage / Parking brake actuated / Forward/ reverse travel / 1st- or 2nd-speed range / Turn signal and hazard lights / High-beam driving lights
Radio-ready cab, fused 12-volt radio electrical lead and speakers, power port
Pre-wired for roof beacon

POWERTRAIN/BRAKES
Hydrostatic (HST) transmission: Electric shift control / Single-lever joystick F-N-R / Hydrostatic oil cooler / Inching pedal / 2 speeds forward and reverse / Infinitely variable speed control
Parking brake, spring applied, hydraulically released, switch operated
45% limited-slip front and rear differentials

HYDRAULIC SYSTEM
Hydraulic system oil cooler
Float detent
Reservoir sight gauge
Fine-micron hydraulic filters, vertical mounting
Hydraulic function lockout
3-function hydraulic valve with electrohydraulic push-button 3rd-function control
Quick-coupler diagnostic ports: Priority pressure / Hydraulic pump pressure / Control valve pressure / HST pressure

OPERATORS STATION
Cab (conforms to SAE J1040, SAE J231, ISO 3471, and ISO 3449): Air conditioner/heater/ defroster / Tilt steering / Inside mirror (Optional or special)
Canopy
Storage compartment for operators manual and other items
Rubber floormat
Rearview mirrors, outside (2)
Handholds and steps, ergonomically located and slip resistant (conform to SAE J185)

LOADER LINKAGE
Z-bar loader linkage provides high bucket breakout
Loader boom service locking bar (conforms to SAE J38)

BUCKETS AND ATTACHMENTS (OPTIONAL)
Full line of buckets with selection of bolt-on cutting edges
Electrically actuated quick-coupler with flags
Full line of construction utility forks, pallet forks, and other attachments*
ISO parallel-pin hydraulically actuated coupler

TIRES
365/70R18 Mitas EM-01
400/70R20 Michelin XMCL (Optional or special)
405/70R18 Firestone Duraforce (Optional or special)
400/70R20 Nokian Hakkapeliitta Tri (Optional or special)

OTHER
Fenders, front and rear
Articulation locking bar (conforms to SAE J276)
Vandal protection, includes lockable engine enclosure
Counterweight, saddle-type, built-in
Rear bottom guard, built-in
Drawbar, with locking pin
Lift eyes
Tie-downs
Fire extinguisher (Optional or special)
Material-weighing system (Optional or special)
Ride control (Optional or special)
JDLink wireless communication system (available in specific countries; see your dealer for details)

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.
Express Financing Get Pre-Approved
Get a FR8Star Shipping Estimate