Heavy-Duty Snow Blower - 60-inch Back
- Wide 59-inch (150-cm) clearing capacity makes quick work of clean up
- Cast-iron gearcase protects helical gears
- Impeller maximizes engine horsepower for superior snow throwing capacity and distance
- Auger features shear bolts at each end for added protection to auger and drive system from chunks of ice or solid objects
Auger with double center flighting on 60-in. (152-cm) Heavy-Duty Snow Blower
60-in. (152-cm) Heavy-Duty Snow Blower
The low-speed auger picks up snow and moves it toward the center of the machine into the high-speed impeller, where it is blown out of the discharge chute.
To increase snow processing capabilities the Heavy-Duty Snow Blowers feature:
- 23-in. (584-mm) housing height
- 7.25-in. (184-mm) spout diameter
- 16-in. (406-mm) diameter auger with double center flighting
- Two drift cutters
Front 3-point hitch with A-frame quick attach system
Front 3-point hitch and A-frame quick attach system
Snow blower portion of A-frame quick attach system installed on snow blower
The heavy-duty snow blowers mount using a front 3-point hitch. Advantages of front 3-point hitch mounting are:
- Robust construction designed for added strength and longer life than a quick-hitch
- Consistent levelness throughout lift travel that improves snow placement
- Higher lift heights that increase maneuverability around uneven sidewalks and curbs
- On a 1025R Tractor, a heavy-duty snow blower lifts 1 in. (25 mm) higher than the quick-hitch snow blower.
- Faster implement changes as portions of the front 3-point hitch can remain on the tractor when a loader or mid-mount mower deck is installed
- The 3-point hitch’s A-frame quick attach system is an industry standard Category 0/1N design
- Shared with the 366 Front Blade and 60-in. (152-cm) Heavy-Duty Rotary Broom, allowing for tool-free, quick change between implements*
*NOTE: 60-in. (152-cm) Heavy-Duty Brooms use a front 3-point hitch on 3033R-3046R, 3120-3720, model year 2017 and newer 2032R, and 2038R Tractors. Does not apply to 60-in. (152-cm) Heavy-Duty Brooms installed using a quick-hitch on 1023E, 1025R, 1026R, and 2025R Tractors.
Telescoping drive shaft
Close-up of heavy-duty helical gearbox
The telescoping universal joint drive shaft provides easy attachment.
The heavy-duty cast-iron helical gearcase drives the impeller to maximize the engine horsepower and gives excellent throwing capacity and distance.
Durable auger drive
The worm gear drive features the following:
- Durable cast-iron housing
- 5-to-1 reduction driving the snow-collecting augers at the most effective speed
- Tapered roller bearings on both the input and output shafts for long life
- Large output shafts, 1.25 in. (3.2 cm) in diameter, supported at each end of the auger housing by sealed ball bearings for smooth operation
- Shear bolts (at the outer end of each half of the auger), protecting the auger and drive system from damage if a chunk of ice or other solid object should get caught in the auger
- Four spare shear bolts in storage holes, located on the auger housing
Hydraulic chute control
The chute can be rotated hydraulically 200 degrees (patent number 4,409,748):
- Allows blowing snow in desired direction
- Faster and more convenient than manual control
- Tractor must be equipped with dual selective control valve (SCV)
Spout deflector
The spout deflector can be changed manually to control the height in which snow is blown.
1562 mm
Clearing width: 59 in.
1499 mm
584 mm
16 in.
406 mm
Drive
Splined-coupler power take-off (PTO) shaft to helical gearcase
Auger drive gearbox
Cast-iron worm gearcase with 1.25-in. (32-mm) output shafts
Protection
Shear bolt for each auger half, four shell-mounted extra shear bolts
1562 mm
clearing width: 59 in.
1499 mm
584 mm
1.9 mm
6.35 mm
1315 mm
432 mm
406 mm
100 x 406 mm
184 mm
