Loader - H160 Back
- Compatible with 3R Series Tractors
- Quik-Park™ mounting system for efficient attachment and removal
- Easy maintenance for increased uptime
- 999 pounds (453 kg) lift capacity
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
To view a video of how the Quik-Park™ system works click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
90 in.
617 kgf
1360 lbf
Measured at 500 mm ahead of pivot (V)
453 kgf
999 lbf
1295 kgf
2855 lbf
Measured at 500 mm ahead of pivot (Z)
922 kgf
2032 lbf
1188 kgf
2619 lbf
68.6 in.
68 in.
206.8 lb
617 kgf
1360 lbf
Measured at 500 mm ahead of pivot (V)
453 kgf
999 lbf
771 kgf
1700 lbf
Measured at 500 mm ahead of pivot (X)
595 kgf
1312 lbf
1295 kgf
2855 lbf
Measured at 500 mm ahead of pivot (Z)
922 kgf
2032 lbf
1205 kgf
2657 lbf
At 59-in. (1500-mm) lift height (XX)
1518 kgf
3347 lbf
At ground-level line (ZZ)
1188 kgf
2619 lbf
2284 mm
90 in.
At full height - bucket level(B)
83.5 in.
2123 mm
At full height - bucket dumped (C)
1743 mm
68.6 in.
10.24 ft
2.9 in.
773 mm
30.4 in.
At ground level - bucket level (F)
1381 mm
54.4 in.
43 degree (angle)
Rollback angle, degrees (G)
25 degree (angle)
2.76 seconds
Loader lower, seconds
1.69 seconds
Bucket dump, seconds
2.91 seconds
Bucket rollback, seconds
1.72 seconds