Skip Nav

Rotary Cutter - RC6M Back

Model Number :
RC6M
RC6M Rotary Cutters with a Category 1 hitch use the exclusive iMatchTM system.
  • Standard stump jumper blade holder
  • Domed shape top deck is smooth and easy to clean
  • 3-point hitch hookup provides more strength
  • Front and rear chain shields offer safety
Request Information
What is the best cutter for your job?

NOTE: Only for single spindle and multi-spindle.

 

John Deere rotary cutters lead the way with innovative design, superior performance, and proven durability. Valuable features such as the Double-Decker™ design and Max Flow cutting chamber prevent water and debris from accumulating on the smooth, dome-shaped top deck while the flat bottom deck absorbs the punishment from rocks and stumps.

 

The top deck stays smooth - no dents, no dings, no holes. The internal supports sandwiched between the top and bottom decks are key to the smooth and structure-free Max Flow cutting chamber, while at the same time provide added strength and durability.

 

To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields. John Deere rotary cutters continue to advance in value with powerful gearboxes, blade holders, and compatibility with a wide range of tractors.

 

Here are situations when a rotary cutter provides value:

  • Clipping pastures encourages grass growth, optimizing valuable pasture acreage.
  • Cutting grass and stalks helps control insects.
  • Routine cutting keeps weeds from reseeding.
  • It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
  • Cutting grass waterways encourages root development and helps prevent erosion.
  • Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
  • Clearing out brush.
  • Control undergrowth and grass in orchards, vineyards, and groves.

Decide what model to use based on:

  • The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours. Similarly, the limitation of a small area will guide operators to use a smaller mower.
  • The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
  • Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.

John Deere rotary cutters are available in two duty-level categories:

  • Mid-duty
    • RC M models are available in 1.5-m (5-ft), 1.8-m (6-ft), 2.1-m (7-ft), 2.5-m (8-ft), and 3.2-m (10-ft).
    • This duty-level category cuts brush up to 50.8 mm (2 in.) in diameter.
  • Heavy-duty
    • RC R models are available in 3.2-m (10-ft) and 4.2-m (14-ft).
    • This duty-level category cuts brush up to 76.2 mm (3 in.) in diameter.
    • RC6R is available in 1.8-m (6-ft) and the RC7R is available in 2.1-m (7-ft) cut widths; they cut brush up to 101.6 mm (4 in.) in diameter.

NOTE: R Series are heavier built to cut at a 101.6 mm (4 in.) capacity level more frequently and for longer durations.

Front and rear safety chain shields are standard
Front safety chains (RC6M shown) Front safety chains (RC6M shown)
Rear safety chains (RC6M shown) Rear safety chains (RC6M shown)

Front and rear chain shields are standard equipment:

  • Offer protection for the operator yet allow uncut material to pass into the cutting chamber with minimal restriction
Standard suction blades provide additional blade lift
Suction blade (standard equipment) Suction blade (standard equipment)

Suction blades provide additional lift action for picking up downed material. The blades are 1.3 cm x 10.2 cm (0.5 in. x 4 in.) in size and heat-treated for long wear life.

 

The fast blade-tip speed ensures clean cutting and fine shredding of material.

  • Up to 88.5 m/sec (17416 fpm)
Warranty
Five-year limited gearbox warranty provided on every John Deere rotary cutter
Five-year warranty on all flex-wing gearboxes Five-year warranty on all flex-wing gearboxes
Five-year warranty on all rotary cutter gearboxes Five-year warranty on all rotary cutter gearboxes

John Deere is so confident in the reliability of the gearbox that rotary cutters come with a 5-year limited gearbox warranty.

 

There is also 1-year warranty on the complete machine, including drivelines, clutches, and many other components.

Capacity
Cutting width
1,830 mm
72 in.
Cutting height
25 to 241 mm
1 to 9.5 in.
Cutting capacity
50 mm
2 in.
Cutting chamber Depth
216 mm
8.5 in.
Tractor compatibility
Tractor PTO HP range
Minimum 22 kW
30 hp
Tractor PTO
540 rpm
Hitch
Type
Lift-type
Category
1; or convert to 2
Dimensions
Transport width
1,910 mm
75 in.
Overall width
1,910 mm
75 in.
Overall length
2,882 mm
114 in.
Deck shape
Domed
Deck type
Double decker
Deck thickness
Upper
3.5 (10) mm
0.138 (10) in.
Lower
3.5 (10) mm
0.138 (10) in.
Side skirt thickness
6 (3) mm
0.25 (3) in.
Approx. weight
472 kg
1,041 lb
Drivelines
Size
Main
ASAE Category 3
Protection
Main
Slip-clutch driveline
Gearcases
Number
1
HP rating
Center
Cotninuous 56 kW
75 hp
Peak 67 kW
90 hp
Blades
Thickness
13 mm
0.5 in.
Width
102 mm
4 in.
Type
Suction
Blade tip speed
540 RPM
5,308 m/min
17,416 fpm
319 km/h
198 mph
Material flow system
Max flow
Holder
Type
Round stump jumper
Wheels
Type
Puncture proof laminated
Shielding
Front
Chain
Rear
Chain
Additional information
a
a
D
D
Key Specs
X