Skip Nav

Sub-Compact Tractor - 1023E Back

Model Number :
1023E
Meet the most capable sub-compact tractors on the market: the John Deere 1 Family. 1023E Sub-Compact Tractor.
  • Powerful Final Tier 4-compliant diesel engine
  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

For pricing and additional discounts, see your local John Deere Dealer.

Request Information
Spend more time working and less time switching equipment with easy implement swaps
Drive-over deck makes connection simple Drive-over deck makes connection simple

1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.

 

  • AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
    • Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
  • Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
  • Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
  • iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
    • Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
  • Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.

 

1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.

Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)
Twin Touch™ pedals Twin Touch™ pedals

The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.

  • Ideal for loader or mower applications where frequent direction and speed changes are needed
  • No clutching for fast direction changes
  • Match the job at hand with infinite ground speeds
Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering
Standard 4WD and power steering make 1 Family Tractors excellent for mowing Standard 4WD and power steering make 1 Family Tractors excellent for mowing

Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.

  • Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
  • Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
  • High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
  • The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
Comfortable and convenient open operator’s station
Open operator's station (1025R shown) Open operator's station (1025R shown)

The 1023E open operator station is designed for greater comfort and increased visibility.

 

Comfortable operation  

  • Thick, textured rubber floor mat reduces vibrations and absorbs shock and noise.
  • Step-through flat platform and fender-mounted handrails make it easy to get on and off the tractor from either side.
  • Controls are conveniently located next to the fenders and are color-coded for quick identification.
  • Easy-lift hood with dual gas-charged lift struts as standard equipment. A simple flip of the latch lets you open the rugged composite hood, providing wide open access to the engine compartment.
  • Foldable rollover protective structure (ROPS) keeps you protected during operation and improves the ability to store tractor in a garage.
Foldable Roll-Gard ROPS Foldable Roll-Gard ROPS

Foldable Roll-Gard™ ROPS is standard equipment on 1023E.

Increased visibility
Standard (and optional) lighting shown Standard (and optional) lighting shown
  • Sloping hood design provides improved visibility especially during front loader work
  • Standard lighting equipment allows you to work from early in the morning to late at night:
    • Two front-mounted sealed-beam halogen headlights
    • Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
    • Built-in tail light on one warning/hazardous light
    • Additional front- and rear-light kits are available
Instrumentation
Instrumentation Instrumentation

Updated instrumentation is standard equipment for operating convenience and confidence. Instrumentation includes:

  • Tach/hour meter
  • Oil-pressure indicator light
  • Alternator-indicator light
  • Flashing-warning lights
  • Coolant-temperature light
Suspension seat
Suspension seat Suspension seat

The spring suspension seat adjusts fore/aft for operator convenience. The seat adjustment lever is located in the center under the seat area. The seat flips forward for protection from the elements.

Mower deck height-adjustment knob
Mower deck height-adjustment knob Mower deck height-adjustment knob
  • The mower deck height-adjustment knob allows the mower height to be adjusted from 2.5 cm to 10.2 cm (1 in. to 4 in.).
  • A spring-loaded detent ensures the height position is locked into place.
  • The transport lock position holds the deck 10.2-cm (4-in.) from the ground, so that rear implements can be used separately while the mower is installed.
Beverage holder and additional storage
Beverage holder and additional storage Beverage holder and additional storage

The beverage holder is contour-molded and seated into the fender for a clean look. It is conveniently located and dual-sized to accommodate many containers. The placement of the cup holder is within arm's reach.

Additional storage is conveniently placed into the fender for loose items like keys and work gloves.

Fuel fill and fuel gauge locations
Fuel fill and fuel gauge locations Fuel fill and fuel gauge locations

The fuel fill location is conveniently accessible on the left-hand side fender. The fuel gauge is located in close proximity to make the fuel refilling process easier.

Flexibility in operation with multiple mid-mower lift system options
Mid-mower lift system options Mid-mower lift system options
Mid-mower lift system options

Standard mechanical mower lift
 
The standard mechanical mower lift system moves the mower in conjunction with the rear implements and comes factory-installed on 1 Family Tractors.


 
Optional hydraulic mower lift
 
The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the loader joystick to lift and lower the mower deck.


 
Optional independent hydraulic mower lift
 
The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using a rocker switch mounted on the tractor, located at the operator’s left knee.

 

For more information on this mid mower lift system click here.

Key Specs
Engine power (gross)
SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm
Power take-off (PTO) power
11.1 kW
14.9 hp
Steering hydraulics
13.2 L/min
3.5 gpm
Implement hydraulics
13.2 L/min
3.5 gpm
Hitch type
Limited Category 1
Lift capacity, 24-in. behind link arms
344 kg
758 lb
Standard transmission; forward/reverse
Hydrostatic - two range
Cruise control
No
Approximate shipping weight (open-station; cab)
Open station: 656 kg
1446 lb
Cab: Not applicable
Wheelbase
1450 mm
57.1 in.
Engine
Manufacturer
Yanmar®
Engine model
3TNM74F-NCJT
Engine power (gross)
SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm
Power take-off (PTO) power
11.1 kW
14.9 hp
Rated engine speed
3200 rpm
Type
Diesel
Injection pump type
Indirect injection
Aspiration
Natural
Emissions compliance
Final Tier 4
Cylinders/displacement
Three cylinders: 0.993 L
60.6 cu in.
Number of cylinders
Three
Cylinder liners
Cast-in-block
Bore and stroke
74 x 77 mm
2.91 x 3.03 in.
Compression ratio
23.5:1
Lubrication
Pressurized
Cooling system
Water pump
Air cleaner
Dual element
Engine torque at rated speed
47.7 Nm
35.2 lb-ft
Fuel tank capacity
24 L
6.3 U.S. gal.
Electrical
Battery size
500 CCA
Alternator (12-V)
40 amp
Starter size
1.2 kW
1.6 hp
Fuel system
Type
Indirect injection
Transmission
Standard transmission; forward/reverse
Hydrostatic - two range
Left-hand reverser
No
Final drive
Spur gear
Brakes
Wet disc (left-hand pedal)
Steering
Power
Axle capacity
Front
612 kg
1349 lb
Rear
715 kg
1576 lb
Creeper
No
Cruise control
No
Differential lock
Yes
Hydraulics
Type
Open center
Pump rated output
Steering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm
Pump type
Single gear
Maximum operating pressure
138 bar
2000 psi
Draft control sensing
Select control
Remote control valves available
Three
3-point hitch
Type
Limited Category 1
Lift capacity, 24-in. behind link arms
344 kg
758 lb
Power take-off (PTO)
Standard
Rear: 540 rpm
Mid: 2100 rpm
Control
Independent
Clutch
Wet disk
Brake (for mid and rear PTO)
Wet disk
Fluid capacities
Crankcase with filter
2.7 L
2.9 gal.
Transmission and hydraulic system
12.3 L
3.2 gal.
Final drive
Type
Spur gear
Differential lock
Yes
Operator station
Rollover protective structure
Type
Foldable
Yes
Platform - flat/straddle
One-piece semi flat
Gear shift location - console/floor
Left-hand side
Cab
Dimensions
Wheelbase
1450 mm
57.1 in.
Front axle clearance
195 mm
7.7 in.
Turning radius without brakes
Outside front tire: 2.51 m
8.2 ft
Limited slip differential
No
Approximate shipping weight (open-station; cab)
Open station: 656 kg
1446 lb
Cab: Not applicable
Tires
Front
R3 Turf: 18x8.50-10
R4: 18x8.5-10
Rear
R3 Turf: 26x12-12
R4: 26x12-12
Front tread range
931 mm
36.7 in.
Rear tread spacing
895 mm
35.2 in.
Miscellaneous
Toolbox
Yes
Additional information
a
a
D
D
X